Bribie Pool Safety Fence
A reminder regarding the pool fence shown here is a non-compliant pool fence.
The QBCC has recently advised that these panels do not comply with section 2.3.7 of AS1926.1-2007 as the gaps between the vertical members at the top of the fence are greater than 100mm.
Additionally, even where gaps between horizontal members do not exceed 100mm and the section is not within the non-climbable zone, these panels cannot form part of an effective pool safety barrier.
Related Articles
NCC 2022 Shower Floor Grading Requirements
NCC 2022, effective from May 2023, revised shower floor grading to be minimum 1:80 to maximum 1:50. This applies to all States and is irrespective…
Changes to Branch Drain Connections
HIA has issued advice regarding the changes to branch drain connections in the revised NCC 2022. For further information, see the link below:…
Brisbane City Council – Changes to Siting Variations
Brisbane City Council has now published further information about changes to siting variations which can be found at: https://www.brisbane.qld.gov.au/planning-and-building/do-i-need-approval/types-of-approval/building-near-the-boundary
